Same-day DTF: order by 2 PM Mon-Fri, 10 AM Sat

Press guide

Siser Easy Transfers press settings

What Siser publishes for its Easy Transfers DTF, plus its artwork rules. Where the page is silent, we leave it blank.

Checked October 26, 2026

Your film may differ. These are the maker's numbers for this product only. If you press a different film, check the supplier sheet that came with it.

Settings

Siser Easy Transfers press settings and where each comes from
SettingWhat it saysSource
Temperature290°FSiser Easy Transfers page
Time12 to 15 secondsSiser Easy Transfers page
PeelHot, right away, in one smooth motionSiser Easy Transfers page
PressureNot on the page we used. Check Siser's instructions.–
Pre-pressNot on the page we used.–

Artwork rules from Siser

Siser artwork guidelines
RuleWhat it saysSource
Minimum line weight0.018 inchSiser artwork guidelines
Raster artwork300 dpiSiser page (Stahl's says the same)

Run your file against these in the "Is my file ready?" checklist.

Steps

  1. Set the press

    290°F. Set the time for 12 to 15 seconds.

  2. Press

    Place the transfer and press for the set time. Use the pressure Siser lists for your press.

  3. Peel hot

    Peel the carrier right away, in one smooth motion.

Where to get it

Siser does not sell direct. Its page sends buyers to distributors, so this guide is useful to anyone pressing Siser film, wherever it was bought.

Sources

  1. Siser North America, Easy Transfers

Page read on October 26, 2026.