HTV Foil

$3.00$5.50

Clear
Description:
Adhesive/Heat Transfer Foil
  • Mirror/Reverse design before cutting
  • Cut with the Adhesive side (dull side) facing upwards and plastic carrier (shiny side) facing down
  • Use a very low pressure cut; do a test cut until the design weeds easily
  • Weed away excess material leaving only the design on the adhesive carrier for heat transferring
  • With your scissors cut a piece of foil that is slightly larger than the adhesive design and set aside
  • Preheat garment prior to application.  Position weeded Adhesive design on garment with the carrier side up
  • Place Kraft cover sheet over design
  • Press using Adhesive Application instructions below; Very Important to PEEL HOT
  • Carefully place foil over the Adhesive design and make sure it is completely covered
  • Place Kraft cover sheet over design and apply heat using Foil Application instructions below
Adhesive Application Instructions

Time: 3-5 seconds, peel hot
Temperature: 300°F/149°C
Pressure Firm: Light (20 PSI)

Foil Application Instructions

Time: 8-10 seconds, peel cold
Temperature: 300°F/149°C
Pressure Firm: Firm (60-70 psi)

 

 

Local Pick Up Only

Return Policy

Terms & Conditions